STRONGCO is selling this:

National NBT16

Make
National
Model
NBT16
Category
-AAA / Handling / lifting: Crane: Mobile Crane / Boom Truck
Year
2012
Location
North America: Canada
Strongco Corporation 1640 Enterprise Rd. Mississauga Ontario, L4W 4L4, Mississauga, - Canada
Hours
219
Condition
Used
Serial Number
410006
Price
Price on Request

Description

  • ONE USED 2012 NATIONAL TRUCK MOUNTED HYDRAULIC CRANE, MODEL NBT1660,
  • 16 TON CAPACITY, SERIAL NUMBER 410006 complete with: .
  • BOOM: 24’- 60' (7,32 - 18,29 m) three (3) section , four plate and full power telescoping boom
  • JIB OPTION: 22' (6,71 m) single section jib
  • BOOM ELEVATION: One (1) double acting hydraulic lift cylinder with integral holding valve. (-10 degrees to +80 degrees)
  • CONTROLS: Radio remote control for use with or without dual side docking stations, engine speed control in remote, horn and engine start/stop switches
  • LOAD MOMENT INDICATOR: LMI in lieu of HCAS. LMI displays information on length and angle of boom, working radius, rated load and total weight being lifted. LMI with WADS and internal boom wiring anti-two block system..
  • SWING: 410 degrees non-continuous rotation with adjustable swing drive.
  • HYDRAULIC SYSTEM: Closed center type consisting of a variable displacement high pressure pump which supplies oil to main control valve and an outrigger control valve. Reservoir capacity 25 gallons (91,6 L) 5 micron return line filter. Valve on suction line.
  • HOIST: Burst of speed planetary winch. Bare drum pull 10,380 lb (4708 kg) low speed.
  • WIREROPE: 220' (67 m) of 9/16” (14 mm) rotation resistant wire rope. Single line pull 7,700 lbs (3.492,6 kg)
  • HEADACHE BALL: Round headache ball with top swivel, 7 ton (6,35 mt) capacity rating.
  • LINE BLOCK: LB2-3, two and three part reeving, 12.5 ton (11,3 mt) capacity hook block with one sheave
  • OUTRIGGERS: Front out and down outriggers with swivel pads with an 17' 4(5.3 m) full-span and 12' 4 (3.8 m) mid-span with manual lock pins. Capacity charts provided for full, mid and fully retracted spans. Vertical jacks extend 27” below the top of the truck frame and have 26” vertical travel.
  • STABILIZERS: ASH rear stabilizers 10' (3,1 m) span with motion alarm
  • FRONT STABILZER: Single front outrigger, for 360 degrees stability
  • TORSION BOX: Torsion resistant subbase for 20' deck, bolt-on mounting hardware.
  • FLATBED: 20’ super duty wood floor deck with removable, rear boom carrying rack (anchors at rear of torsion box, 30” steel solid wall bulkhead, mudflaps, and rear bumper underride protection.
  • MISCELLANEOUS STANDARD EQUIPMENT: Anti-two block with internal wiring, back up alarm, outrigger motion alarm, two (2) owner's manuals (English; 1 paper/1 disc) and outrigger monitoring system. ICC Safety Kit.
  • STANDARD PAINT: Axalta Imron® Elite Productive paint. National Platinum color for frame, turret and base boom section; standard Black for hydraulic reservoir, SFO, torsion box (frame), inner outriggers and inner boom sections.
  • CHASSIS: Installed on a used 2012 Peterbilt 348 Chassis, VIN2NP3LN9X7CM163407 with 16,000 lb. front axle, 16,000 lb. front suspension, 40,000 lb. rear axle, 40,000 lb. rear suspension – 52” spacing, Paccar PX-8 300 H.P. diesel engine, Allison 3500 – RDS-P automatic transmission, Dual 60” gallon aluminum fuel tanks, 385/65R 22.5 front tires, 11R22.5 rear tires, Air conditioning, Trailer package (air/electric to rear) for future tow plate (not included),
  • Chassis colour: White
  • METER READINGS: 8,495 kms, 219 engine hours
  • Capacity : 19
$159,000 USD $159,000 USD $159,000 USD
*
Ø
▼
$159,000 USD
$159,000 USD

Similar Machines

(Similar models of the same year with comparable operating hours.)