H&R CONSTRUCTION PARTS is selling this:

Caterpillar

Make
Caterpillar
Category
Construction / Spare Parts, Components and Attachments / Bucket
Location
North America: United States of America
20 Milburn Street, 14212, Buffalo, - USA
Condition
Used
Price
Price on Request

Description

  • Description:
  • This is a 48 inch wide, heavy duty bucket. This bucket uses 5 teeth, but all of them are missing and the teeth shanks are all worn. This bucket is also not equipped with side bar protectors. All of the pin holes have a little bit of wear and the LH pin ear is missing both the upper and lower inner pin collars. The wear bars on the bottom of the bucket are all pretty much worn to nothing and there is a long crack spanning the width of the bucket, where a wear bar is breaking free from it. There are a few more cracks on the bottom as well. There is also a crack on each side of the bucket, at the bottom bucket opening corners (see photos).
  • This bucket also appears to be wearing thin on the lower backside of it and the lower front sides are worn back to some of the side bar protector bolt holes.
  • Manufacturer: Caterpillar
  • Dimensions for capacity:
  • 42 inches High, 42 inches Wide, 42 inches Deep
  • Pin area dimensions:
  • Upper pin hole diameter: 3 1/2 inches
  • Lower pin hole diameter: 3 1/8 inches
  • Inside width of pin ears: Not available
  • Distance from the center of the upper pin hole to the
  • center of the lower pin hole: 19 inches
  • Weight:
  • Dimensions for shiipping:
  • 5 feet High, 4 feet Wide, 5 1/2 feet Long
  • Fits to Manufacturer : CATERPILLAR
  • Fits to Model : 330CL