Midcoast Trucks is selling this:

Isuzu FVZ 260/300

Back

Make: Isuzu
Model: FVZ 260/300
Category: Trucks: Trucks: Water Trucks: Rigid
Year: 2020
Location: Australia: Australia
Pacific Hwy & Nursery Rd, Macksville, NSW, 2447, Australia, DL 13884
Condition: New
Price: Price on Request

Contact Seller

Description

1 x only NEW 11 / 2020 Isuzu FVZ260-300 AUTO - 7.8 litre, turbo / intercooled, 300hp, 6 speed ALLISON AUTOMATIC.
GVM: 26,000 kg GCM: 36,000 kg Power: 221 kW @ 2,400 rpm Torque: 981 Nm @ 1,450 rpm
FITTED WITH A NEW ALLQUIP WATER TRUCKS - 15,000 LITRE CAPACITY;
TANK FEATURES;
15,000L Heavy duty steel tank - Australian made 15,000L water cartage transport tank
HYDRAULIC WATER PUMP DRIVE SYSTEM
1x 5mm steel tank outer shell with pressed rib sidewalls for additional strength and weight optimisation
1x 6mm floor with market leading full-length sump for complete tank drainage
Advanced Stability Control including low profile tank design with internal baffles and angled corners for surge protection and stability
3x 5mm crossway tank baffle walls to minimize front and rear water surge
2x 5mm longitudinal baffle walls full length of tank to minimize sideways water surge
2x Suction hose storage holders full length of tank. 2 x Suction hoses supplied
Adjustable built-in overflow breather system to adjust tank capacity to suit different cab chassis' s or reduce the capacity for on-road use or increase capacity off-road use
Auto pump prime box to suit pump system.
Tank to be mounted on vehicle via heavy-duty spring tank mountings to allow for chassis flex
Two-pack epoxy paint system externally with white paint finish
WATER PUMP;
100x65x250 Southern cross hydraulic drive - Heavy duty cast iron pressure/transfer water pump, approximately 1,800 LPM at pump, total 60 MTR head and 86 PSI. Pump can pass solids up to 20mm. Water pump to be close coupled to hydraulic drive gear motor. Flexible bellows fitted between tank and pump to permit ease of removal of the pump if required and to isolate pump vibration
SUCTION;
3'' Suction - 80mm (3'') suction system with water valve and cam-locked inlet. System capable of filling tank from water supplies such as rivers and holding dams
SPRAY BAR MAIN;
Pipe work - 80mm (3'') pipe work to be hot dip galvanised. For quick and trouble-free maintenance, systems features bolted-on components and conveniently located external water ways
Centre spray - One 80mm (3'') rear centre fan spray. Fan spray, on roll groove and camlock fittings for full adjustment of spray. Fan spray to have adjustable clamp for controlling water volume, e.g. fine or heavy spray patterns
Batter sprays - Two 80mm (3'')rear batter fan sprays. Sprays on roll groove and camlock fittings for full adjustment. Fan sprays to have adjustable clamp for controlling water volume, e.g. fine or heavy spray patterns
V-jet bar - 80mm (3'') pressure fed v-jet spray bar fitted with 12 brass v-jets and removable ends for flushing
Front Sprays - Two forward facing gutter flushers mounted at front of truck for washing down roads etc
PUMP OUTLET;
80mm (3'') fitted with 80mm wafer butterfly valve and cam-lock. System capable of emptying tank
HOSE REEL;
Manual hose reel 25mm - Heavy duty high volume rewind hose reel, with industrial wash down hose and adjustable fire fighting nozzle
LID;
80mm Top fill system and funnel - Galvanised funnel, 80mm (3) hydrant and pump topfillsystem including regulation air gap and non return check valve. Top-fill to comply withwater authority regulations. System can be used with hydrant stand pipes, overhead gantry fill or self filling with water pump
Note: Price is NOT including on road costs.